The Macro Flash Bracket - Assembly and Use

1. Attach the strobe supports by simply pushing the bottom of the support
on to the round ball base which is attached to the bracket.
Make sure the support fits properly before attaching your strobes.

2. Attach Camera with the supplied 1/20 knob in the middle slot. This slot
allows for the camera to be moved forward or back.

3. Slide strobes into the cold shoe on top of the strobe support.
Make sure the strobe is secure. Do not use if the strobe does not fit
properly. This could result in the strobe separating from the bracket.
This bracket can be used with a wireless transmitter or off camera cord.

4. Never adjust the strobe by grasping the strobe itself. Simply move
the strobe by grasping the strobe support and the base of the strobe
and adjust gently. The Flex line allows you to move the strobe to your
desired angle.

5. Avoid quick and jerking movements while holding the flash bracket. The
bracket is designed for easy adjustability.

6. Do not add any more length to the strobe support. This will make the
strobe unstable.

7. Do not carry the bracket by the strobe support alone with the camera attached.
This system is designed to detach for easy storage.

8. You may detach the strobe supports and use them with other
attachments to secure your strobe to a light stand, tripod or any
other device which can support the weight of the strobe.

9. Lucas,LLC will warrant the bracket for a period of 90 days.
The warranty will cover bracket parts only. Lucas,LLC will not
be responsible for camera or strobe equipment used with
the bracket. Proof of purchase will be required for any warranty issue.

Thank You for purchasing the Macro Flash Bracket, A product of Lucas, LLC